You can go from a raw microphone recording to a clean, loud-enough MP3 with four free tools that pass the file along to each other. Nothing is uploaded at any step.
1. Record
Open Online Voice Recorder, press "Start recording" and allow microphone access. The level meter warns you if you clip. When you stop, you can keep "Trim silence at start/end" on. Under the result, press Remove noise → (or Studio sound → for the one-click route).
2. Remove background noise
Voice Noise Remover opens with your recording already loaded. Set the strength (0 to 100%). Lower strength mixes back more of the original and sounds more natural. Compare "Play original" and "Play cleaned". Then press Volume Booster → under the result.
3. Raise the volume to a target
In Volume Booster, check the current loudness, then pick a target and press Normalize: -14 LUFS (Spotify target), -16 (Apple Podcasts recommendation), -19 (quieter) or -23 (EBU R 128 broadcast). A limiter keeps the true peak at -1 dBTP.
4. Export
Save as MP3, WAV or FLAC (M4A where your browser supports it). For a specific bitrate, sample rate or a mono file, open the file in Audio Converter.
Optional next steps
- Cut the start or end in MP3 Cutter.
- Turn the cleaned recording into text with Audio to Text.
Handed-over files stay in this browser's storage. A handoff expires after 10 minutes and can no longer be opened. The next tool removes the file when it opens it, and expired files are cleaned up the next time you pass a file along. To remove it right away, clear this site's data in your browser.
FAQ
Is the file uploaded between the steps?
No. Each tool hands the file to the next one through storage inside your browser on this device. The handoff expires after 10 minutes; the next tool removes the file when it opens it, expired files are cleaned up at the next handoff, and you can clear this site's data to remove it right away.
Which LUFS target should I pick?
-14 LUFS is the Spotify target and about -16 LUFS is the Apple Podcasts recommendation; -23 LUFS is EBU R 128 broadcast (official documents, checked 2026-10-26). YouTube does not publish an official loudness target (we could not find one in YouTube's own help pages as of 2026-10-26). After uploading, check the actual playback volume against other videos.
Can I do it in one step instead?
Yes. One-Click Studio Sound runs noise reduction, EQ, leveling and loudness in one pass with presets. Use the step-by-step route when you want control over each step.