LUFS Meter Online: Check Loudness and Normalize Audio for Spotify and Apple Podcasts (Free)

Measure integrated LUFS and true peak in your browser, then normalize to Spotify (-14 LUFS) or Apple Podcasts (-16 LUFS) with sources from their official docs. Also shorten long silences. No upload.

5 min read · Updated Oct 26, 2026

Do it now with this toolLoudness Meter & Normalizer

Every streaming platform plays audio at its own loudness. If your file is far louder than the platform's level, it is turned down; if it is much quieter, it can sound weak next to other content. The free LUFS meter and loudness normalizer measures your file the way ITU-R BS.1770 defines it and sets it to a target, right in your browser.

Official targets (checked 2026-10-26)

PlatformLoudnessTrue peakSource
Spotify-14 LUFS integratedbelow -1 dBTP (below -2 dBTP for louder masters)Spotify for Artists
Apple Podcastsabout -16 LKFS (±1 dB)not above -1 dB FSApple Podcasts for Creators
EBU R 128 (broadcast)-23.0 LUFS-1 dBTP maximumEBU R 128 (2023)

LKFS and LUFS are the same unit. We did not include platforms whose numbers we could not find in their own official documents, such as YouTube.

How to check and fix your loudness

  1. Open the Loudness Meter & Normalizer and drop a file (MP3, WAV, M4A, FLAC, OGG, MP4 and more).
  2. Read the numbers: integrated loudness (LUFS), loudness range (LRA), true peak (dBTP) and sample peak.
  3. Pick Spotify, Apple Podcasts, EBU R 128 or Custom. The source of each preset is shown under the menu.
  4. For talk recordings with long pauses, turn on Shorten silences: pauses quieter than the threshold and longer than the minimum length are cut, keeping the padding you choose, with short crossfades at the joins.
  5. Press the normalize button. The table shows before and after values, and you can play both.
  6. Save as WAV, FLAC, MP3 or M4A, or press Convert format to continue in another tool.

A full voice workflow

Record with the Online Voice Recorder, clean it with Voice Noise Remover or One-Click Studio Sound, then press Loudness normalizer → under the result to land here with the file already loaded. Nothing is uploaded between steps.

Why true peak matters

When audio is encoded to MP3 or AAC, peaks between samples can rise above 0 dBFS and distort. True peak estimates those inter-sample peaks with 4x oversampling. Keeping it at or below -1 dBTP leaves headroom for encoding, which is what Spotify and Apple Podcasts recommend.

FAQ

What LUFS should I use for Spotify?

Spotify's "Loudness normalization" article says it plays tracks at -14 dB LUFS and recommends a master around -14 LUFS integrated with true peak below -1 dB (below -2 dB if your master is louder than -14 LUFS). Checked 2026-10-26.

What about Apple Podcasts?

Apple Podcasts for Creators recommends overall loudness around -16 dB LKFS with a ±1 dB tolerance and true peak not above -1 dB FS, measured per ITU-R BS.1770. Checked 2026-10-26.

And YouTube?

We could not find an official loudness target in YouTube's own help pages, so the tool has no YouTube preset. You can type any value with Custom.

How accurate is the meter?

We synthesized the 25 EBU Tech 3341 minimum-requirement test signals that can be generated (cases 1-6, 10, 13, 15-23) and measured them: all passed, with integrated loudness within 0.021 LU and true peak within 0.021 dB on cases 15-19 (0.14 dB on cases 20-23, tolerance +0.2/-0.4 dB).

Is my audio uploaded?

No. Measuring, normalizing and saving all happen in your browser.

Related Tools